Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced T1000HG7 un - PA6T/6I-GF35 - BASF

Material Data Center offers the following functions for Ultramid® Advanced T1000HG7 un:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Propriétés spécifiques à la matière
Any use of this information falls under the rules of our disclaimer.
Informations produit
Heat stabilized, partially aromatic polyphthalamide for injection molding with strong mechanical properties especially at elevated temperatures and excellent chemical resistance for highly stressed parts. Ultramid® Advanced T1000 HG7 can be characterized as compound with high strength and stiffness, very low water absorption and outstanding dimensional stability. It features a high melting point (320°C) and excellent melt stability.

Markets & applications
Automotive: Fuel system, cooling system, powertrain, thermostat housing, pumps, fuel cell
E&E: Sensors, SMT (surface mount technology) applications
Industry goods: Pumps, compressors
Consumer goods: Home appliances, consumer electronics, furniture fittings
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 0.4 / * % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 0.9 / * % ISO 294-4, 2577
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 14000 / 14000 MPa ISO 527
Contrainte à la rupture 240 / 220 MPa ISO 527
Déformation à la rupture 2.2 / 2.1 % ISO 527
Résistance au choc Charpy, +23°C 75 / - kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 10 / - kJ/m² ISO 179/1eA
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 320 / * °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min 130 / * °C ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa 280 / * °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 22 / * E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 52 / * E-6/K ISO 11359-1/-2
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Permittivité relative, 100Hz 4.5 / 3.4 - IEC 62631-2-1
Permittivité relative, 1MHz 4.6 / 3.6 - IEC 62631-2-1
Facteur de pertes, 100Hz 121 / 109 E-4 IEC 62631-2-1
Facteur de pertes, 1MHz 110 / 20 E-4 IEC 62631-2-1
Résistivité superficielle * / >1E15 Ohm IEC 62631-3-2
Rigidité diélectrique 48 / - kV/mm IEC 60243-1
Indice de résistance au cheminement - / 600 - IEC 60112
Propriétés diversessec / condUnitéNorme du test
Masse volumique 1490 / - kg/m³ ISO 1183
Propriétés spécifiques à la matièresec / condUnitéNorme du test
ISO Data
Indice de viscosité 110 / * cm³/g ISO 307, 1157, 1628
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés
Propriétés spéciales
Stabilisé à la chaleur
Caractéristiques
Tenue de la matière à l’état fondu
Résistance Chimique
Résistance chimique générale
Applications
Automobile, Électrotechnique et électrique
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Autres informations
Moulages par injection
PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 335 - 355 °C
injection molding, Melt temperature, recommended: 350 °C
injection molding, Mold temperature, range: 140 - 170 °C
injection molding, Mold temperature, recommended: 160 °C
injection molding, Dwell time, thermoplastics: 5 min
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.